How do I manually adjust a SKU's on-hand quantity?
!The on-hand popover opened from a SKU row on the Inventory page, with the Manual Adjust tab selected: a Delta field, a required Reason field and an Apply button. The other tab is RMA Return.
Only Global Admin, Admin and Operations roles can; other roles see the number but cannot change it.
Adjusting on-hand by hand: 1. Click On hand (on the SKU row or the SKU's own page) → 2. Manual Adjust tab (the other tab is RMA Return) → 3. Enter Delta (+5 to add, -3 to remove) → 4. Enter Reason (required) → 5. Apply.
- A Delta of
0is refused ("No change"). - On-hand can never be adjusted below 0: the panel shows an error and blocks the change.
What's the difference between Manual Adjust and RMA Return?
- RMA Return is tied to an order: search for the order, enter the quantity returned and an optional note. Use it when a customer sends something back.
- Manual Adjust is tied to no order: stock-count corrections, damage, loss, found stock or any other one-off fix. A reason is required.
Why does my SKU show negative stock if adjustments can't go below zero?
What can take on-hand below zero: If Manual adjustment?: Blocked below zero (the panel refuses it). Otherwise: A channel sale (eBay, Amazon, PrestaShop, Allegro) → Recorded as it happened (a real sale is never refused) → Alarm is raised.
Negative on-hand means you sold more units than the system thought you had (overselling), usually because a listing stayed live on a channel after the last unit left. Until you fix it the number stays negative and the channels keep working from a wrong figure.
Fix: count what is physically on the shelf, then correct the SKU with a manual adjustment (or a stock count if several SKUs are affected; see the Stock counts article).
Will the system tell me when stock goes negative?
Yes, the moment it happens, in three places:
- A Critical case in Cases, named like *"Negative stock: D316 is at -1 on hand"*.
- A red alert in Recent Events on your Dashboard.
- A red Negative stock button with a count on the Inventory page. Click it to see only the affected SKUs. It is hidden when nothing is negative.
There is one case per SKU, not one per sale, so a SKU that keeps selling while negative will not flood Cases. Correct the stock and close the case; if the SKU goes negative again later, a new case opens.
Does a manual adjustment open a case?
No. A manual adjustment is a routine action, so it opens no case, and it cannot cause the negative-stock case above either. It is recorded in full instead. Older manual-adjustment cases from before this changed can be cleared in bulk from the Cases page.
Where can I see what changed?
Every adjustment is recorded in two places:
- The SKU's Activity feed, e.g. *"Stock adjusted: 3 → 5 (+2) — Restocked"*: old and new on-hand, the delta and your reason.
- The Activity Log (Dashboard → Logs), with every other change on your account.
How do I undo a manual adjustment?
There is no undo button. Apply a new Manual Adjust with the opposite delta and a reason saying it is a correction. Check the live on-hand number in the panel first (on-hand still cannot go below 0).
Reversing a mistaken +5: 1. Open On hand panel → 2. Manual Adjust: -5 (reason: correction) → 3. Apply.
What if many SKUs are wrong at once?
Do not adjust them one by one. Use SKU Import in Align stock mode: upload a spreadsheet with the corrected on-hand values and each SKU is set to match the file. It never goes below what is already reserved, so open orders stay protected. An applied Align import can be reverted within 72 hours.
Does an adjustment change Reserved or Available?
It changes On Hand, which changes Available (On Hand minus Reserved). Reserved itself is untouched.